I picked up this screen printed poster from Dapper Ink earlier this week for a steal ($12 for an 11 x 17" print!), but I needed some real inspiration for how to mount and hang it in my living room. I didn't want to do a traditional frame from the hobby store--I have such a hard time finding one that I like, and anything custom costs an arm and a leg. Not to mention, since this is a seasonal print and will be packed away in less than a month, I wanted to showcase it in an unconventional way. So I went on a hunt through the house, and came up with a framing technique all my own. Although I think this mounted poster turned out really great, this method could work for any holiday paraphernalia you pick up this season (photos, greeting cards, etc.)
What you need:
Poster or holiday print 1/4" thick plywood (or foam core board if you're in a pinch) Washi tape Blade or scisors Double sided foam tape Small eye screw (optional) Nail or frame mounting hardware (optional)
How to do it:
1) Start by measuring your poster, photo, or print. You'll be mounting this onto the plywood. Then measure and cut your plywood. Obviously you want your plywood to be larger than the poster, but if you're wondering how much larger, a good rule of thumb is as follows: Make the plywood 3" larger than the print on the top, right, and left and 3 1/2" larger on the bottom. Now, I'm lucky enough to have a husband with a table saw, so this wasn't an issue. However, if you don't have a friend or family member with a table or skill saw, this is where the foam core comes in handy. Simply cut it to size with a straight edge and blade.
2) Find a festive print or color of washi tape. Have I ever mentioned how much I love washi tape?? I truly use it for everything...packaging, labeling, and now apparently framing too.
3) Line up the washi tape with the horizontal and vertical edges of the plywood. Carefully roll it to the opposite end (it's fragile) and firmly press to smooth. I liked this method because it kept me from sanding and filling any of the rough edges of the plywood. Trim your edges once you've gone all the way around the plywood and are satisfied with the placement.
4) Adhere the double sided foam tape to the four corners of the back of the print and line up on top the plywood. Press firmly. I like the floating look of the foam tape.
5) To mount on the wall, I screwed in a single eye screw into the center of the back of plywood about 2" from the top. Then I hung it from an existing nail on the wall. But this piece has a large enough presence, I could just lean it against the wall on a table or mantle.
So that's that! Super simple and a really festive way to hang a holiday print.